The Atlas Store (Free Ship to lower 48 states)
$$ Special Sasonal Sale $$ 

Atlas HVAC Air Purifier Powerful UVC Unit- ATLS ST-UV36
The ST-UV36 HVAC air purifier model is a powerful UVC unit that is recommended for purifying allergies like sinus, bacteria and mold
<
>
$550.00
You Save $340.01
$209.99
Qty
Product Description
 

 ATLS ST-UV36 Model - HVAC Air Purifier   

The ST-UV36 HVAC air purifier model is a powerful UVC unit that is recommended for purifying alergies like sinus, mold, allergies, bacteria, headaches, influenza, bronchitis and household odors. The air system in this unit is1-5 tons and is capable of killing up to 99.9% of existing viruses and prevents these contaminants like mold, mildew and airborne viruses and will prevent them from ever growing again and spreading.

 
 
 
Description: 
Air pollution is really dangerous for people suffering from headaches, sinus, allergies, influenza, and bronchitis. With the help of Atlas HVAC air purifier, you can remove bacteria and allergies from your air and reduce domestic odor. This amazing UV unit is designed to kill 99.9 percent bacteria, mold, mildew and airborne viruses. It will reduce the growth of bacteria and other harmful particles in the air. This HAVC unit has an LED indicator and electronic ballast. Germicidal UVC features increase its efficiency and effectiveness.

Features:
  • Proven to kill 99.9% of airborne germs
  • Home purifier
  • Air Sanitizers
  • Single 254nm dual tube lamp
  • No Ozone
  • Installation takes less than 15 minutes
  • 1 year limited manufacturer warranty
 

1-Year Limited Manufacturer's Warranty

 
Specifications:​
 
  •  Model ST-UV36
  • 13000 hours UV bulb lifetime 
  • 254 NM UVC 
  • 36 W power
  • HVAC systems and indoors
  • 110V or 220V Voltage
  • Work within 1500 sqft
  • Bulb diameter: 17mm, length 411 mm
  • 254*160*56 mm Base
  • 475*260*125 mm dimensions 
  • 1.5 KG Net Weight
  • 2.2 KG Gross weight
 

Installation:

PLEAE NOTE: PROFFESIONAL INSTALLER IS REQUIRED FOR INSTALLING THIS DEVICE  
CAUTION: BE SURE TO WEAR APPROPRIATE PROTECTION AS CUTTING METAL IS LOUD AND PIECESMAY BE SHARP AND HOT (I.E. HAND, EAR, EYE, AND FACEPROTECTION)
  1. Disconnect power to the HVAC system before installing the unit.
  2. Need to create a template and tape it to the duct work in the intended installation position.
  3. Drill pilot holes as required with a 3/32” drill bit.
  4. Cut out the appropriate hole on the HVAC pannel.
  5. Remove any burrs and be sure duct surface is flat after cutting the hole(s).
  6. Install the bulb(s) in the unit by sliding the bulb in from the outside until the bulb snaps into place. Insert the unit into the metal duct cut out. If you touch the bulb with your hands, use a cloth to wipe any fingerprints from the bulb(s).
  7. Attach the unit to duct work with the supplied 4 sheet metal screws using a ¼” nut driver. Make sure to tighten screws evenly. The unit has a factory installed gasket that ensures a tight seal between the unit and the duct work. Be sure the unit is flat against the duct work on all sides. CAUTION: DO NOT OVERTIGHTEN SCREWS.
  8. Plug the unit into a grounded 120 volt power outlet.
  9. Turn unit on and verify that the LED indicator light(s) located near the on/off switch is/are illuminated.
  10. The switch is in the on position when the solid line on the switch is pressed down.
  11. Reconnect the power to the HVAC system
  12. The unit is now operational and does not need to be powered off unless cleaning or bulb replacement is necessary
 
Note: NEVER LOOK DIRECTLY AT OR TOUCH A UV BULB WHILE ILLUMINATED.
UPC: 859456003093
SKU: ATLS ST-UV36
 
Reviews (1)
2/8/2016
Name : Tom
Location :
Title :
Review : I got this UV light HVAC air purifier and installed it myself. I love how it cleans the air through our HVAC unit.

Add Review
Questions
Currently there are no questions for this product.
Ask Question

Shopping Cart Software by Ashop